Vivotek SUPREME SD9363 Guía De Instalación Rápida página 8

11. Connect the I/O wire headers to camera and then secure the top cover.
12. Connect the Ethernet cable (along with its cable gland) to the camera.
All manuals and user guides at all-guides.com
To disconnect a LAN cable, loosen the cable
gland and pull the cable against the socket
wall towards the side of the locking tab.
Make sure all waterproof cable glands have
been properly installed. Water leakage will
cause irrepairable damage to the camera.
EN-7
T20
NOTE:
IMPORTANT: