Meta System METABLUE2 Manual De Instrucciones página 8

All manuals and user guides at all-guides.com
Always refer to the operating manual for your mobile phone for details how to pair
up devices.
Once the mobile phone has located the device, identified with the name METABLUE_SPP,
enter 1234 when the link up code is requested.
The mobile phone display will show information relating to the pairing and connection
will be made based on the typical settings of each model of mobile phone.
The system is able to hold up to 4 paired devices in operation: it is not necessary to
repeat the pairing procedure for the last 4 paired mobiles phones every time you switch
the vehicle's dashboard, or the telephone, on or off.
Once 4 mobile phones have been paired up, it is still possible to pair up an additional
mobile phone. This will take the place of the first paired phone in the list of paired
phones stored in the appliance's memory. Should the first paired telephone also be
the last one that was recognised, the newly paired phone will take the place of the
second phone in the list of paired phones.
Recognition
Recognition: procedure for physically recognising the devices without the use of wires
so the system is able to work (MetaBlue module + gsm phone)
Recognition after the key contact has been switched on and any subsequent recognition,
is signalled by 1 tone issued by the loudspeaker and the LED, which remains lit without
flashing. Once recognition has been established, the hands free set can be used.
Recognition takes place with one of the mobile phones previously "paired up" with the
Metablue module, provided this has also been switched on and is within the "range"
of the system (5 meters). Should TWO (or more) "paired" mobile phones be in range
when the key contact is switched on, only ONE of the two (or more) will be recognised
according to the order of priority stored by the device.
The way the system operates depends on the type of mobile phone used. Always refer
to the operating manual for more detailed information.
Please note, in particular, that some types of mobile phone require you to enable
automatic reconnection of the hands free set, whilst this operating mode is always
active with other models.
Voice calls
To place voice calls, this function must be supported by the type of mobile phone you
are using.
Always refer to the operating manual for your mobile phone for instructions how to
store voice tags.
Voice call mode is activated by pressing and holding the button down.
Access to voice call mode is signalled differently depending on the type of mobile
phone you are using. Always refer to the operating manual for your mobile phone.
Once you have pronounced the voice tag for the number to call, it is repeated (provided
it has been identified correctly) and the call is then placed. If not, you will get the
recognition failure signal, which depends on the type of mobile phone you are using.
However, use of the mobile phone's keypad is always a preferable method for placing
calls.
8