Sensor Confirmation Check - GMI PS500 Manual Del Usuario

USER HANDBOOK

2.2.5 Sensor Confirmation Check

The symbol  appears above each sensor type to confirm that
the sensor has been recognised and is being zeroed. When

sensors are zeroed correctly, a symbol appears above each
sensor, as shown in Fig 2.7.
Followed by
Fig. 2.7 Sensor Check Displays
If sensor(s) fail the zero check at the end of warm-up, the
audible and visual alarms activate and the instrument display
will show a spanner symbol and pause, as shown in Fig. 2.8.
2-6