Celestron ExploraScope Guía Del Usuario Y Operación página 4

ExloraScope User Guide TL**.qxd
2
Assembly
Assembling your ExploraScope is simple and
should only take a few moments. Familiarize
yourself with the parts of your telescope first,
then follow the instructions below.
1 Remove the eyepiece dust cap.
Remove front cover and set it aside.
2
Always use the front cover to protect the
ExploraScope's internal components when
not in use.
Place the ExploraScope on its base. You have
3
the option of using the scope with or without
the base or with a tripod (see step 5).
Turn the focuser to adjust the focus of
4
objects being viewed as described in
"Using Your ExploraScope."
To use a standard camera tripod with your
5
ExploraScope you must first attach the
tripod adapter. Align the adapter screw
and pin with the holes in the base of the
scope and tighten. The ExploraScope is
ready to be attached to a standard photo
tripod.
That's all there is to it! If you are using the
base or a tripod you will want to find a steady
surface to set up on before observing. Use the
carrying strap or shipping box to make
transporting your ExploraScope safer and
easier.
All manuals and user guides at all-guides.com
4/9/04 10:00 AM Page 2
Assembling the ExploraScope
2
3
1
4
5