Safety Instructions - nania BEONE Universal Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
Thank you for purchasing a Group 0+ car seat. If this seat does not give you
full satisfaction, if you would like to change an accessory or obtain any help
with regard to this product, you can contact our
ment
(details on the back of this guide).

SAFETY INSTRUCTIONS

WARNING:
Read these instructions carefully before use and keep this guide
in case you need to refer to it in the future. Failure to follow these instruc-
tions may affect your child's safety. To avoid any risk of falling, ensure that
the handle of your Group 0+ is correctly locked and that your child's safety
harness is always fastened. Only install your Group 0+ seat on a forward
facing seat fitted with a 3 point safety belt (1).
DO NOT USE THIS CHILD SEAT ON A PASSENGER SEAT FITTED WITH
AN AIRBAG.
Rigid elements and plastic parts of the child restraint device must be posi-
tioned and installed so that they do not, under normal vehicle usage condi-
tions, become jammed under a moveable seat or in the vehicle door.
Keep all straps used to attach the restraint device to the vehicle taut, and
adjust the straps used to restrain the child. It is also important that the the
straps are not twisted.
Replace the device when it has been subjected to violent stresses in an
accident.
It is dangerous to modify or add to the device in any way without approval
of the competent authority. It is also imperative to follow meticulously the
instructions provided by the manufacturer concerning installation of the
child restraint device.
Keep the seat sheltered from sunlight, so that the child cannot get burned.
Do not leave children unsupervised while in a child restraint device.
Make sure that luggage and other objects likely to cause injuries to the
occupant of the seat if impact occurs are firmly secured.
Do not use the child restraint device without the seat cover.
Do not replace the seat cover with a cover other than the one recom-
mended by the manufacturer, as it directly influences the behaviour of the
restraint device.
If you are in any doubt about installation and proper use of your seat,
please contact the manufacturer of the child restraint device.
Install your child restraint system at the seating positions arranged in the
'Universal' category in the users' manual, using the primary path of the belt.
12
EN - User guide
customer services depart-

Publicidad

Tabla de contenido
loading

Tabla de contenido