nania BEONE Universal Manual De Instrucciones página 14

Adjustment of the safety harness
The car seat harness must be adjusted to the size of your child. The shoul-
der harnesses can be adjusted to three heights, and they must be passed
through the slots closest to your child's shoulders.
Pull the shoulder belts through the slots in the shell and cover
Place the shoulder belts back, at the required height and use the same slots
in both the shell and the cover .
• Loosen the harness: Press on the adjuster positioned between the legs at
the front of the car seat, and pull on the two shoulder harnesses simultane-
ously (13).
• Tighten the harness: Pull on the adjustment strap at the front of the car
seat; it is not necessary to press on the adjuster (14).
A properly adjusted harness actively contributes to the best possible protec-
tion for your baby. You must not be able to pass more than the thickness of
a finger between the harness and the child.
Installing the child in the car seat
Open the harness buckle by pressing on the red button in the centre of the
buckle (15).
Install your child in the car seat, ensuring that his/her back rests correctly
against the back of the car seat.
Bring together the two ends of the shoulder harnesses and close the harness
buckle (16).
Pull on the harness adjustment strap so that the shoulder harnesses are
tightened correctly against your child.
Adjustment of the ergonomic handle
The car seat handle has 4 positions.
To move from one position to another, press the buttons on both sides of the
handle at the same time (17):
• Position 1: use in the car, for rocking and for carrying (18).
• Position 2: use for rocking (19).
• Position 3: use for storage (20).
• Position 4: use as a recliner in the fixed position (21).
Warning when using as a Recliner
Ensure that all the locking devices are engaged before use.
put this recliner on a surface above the ground.
14
EN - User guide
(10) (11) (12).
It is dangerous to