How To Assemble; How To Operate - Electrolux EL4021A Manual Del Usuario

USING THE CANISTER VACUUM CLEANER FOR THE FIRST TIME
ENGLISH

How to assemble

1. Press top lever and lift off
dust cup.
2. Check to confirm that washable
filter screen (A) and HEPA
s-filter (B) are in place.
3. Reposition dust cup; snap into
place.
4. At back of canister, grasp filter
frame and pull straight out. Make
sure washable dust filter is in
place. Slide filter frame back and
snap into position.
5. Insert hose end (C); press until it
clicks into place. (To remove
hose, press tabs on each side
and pull to release.)
6. Insert hose end (D) into hose
handle until it clicks into place.
(To remove hose handle, press
tabs and pull to release.)
7. Push hose handle into wand
until it clicks. (Press tab and pull
to release.)
8. To extend wand, push lever up
and pull.
9. Press tool caddy to clamp onto
upper section of wand; store
3-in-1 tool in caddy.
10. Push desired floor nozzle onto
wand until it clicks.

How to operate

1. Pull out power cord and plug in.
2. Turn dial to start. Continue
turning dial to adjust desired
suction power.
3. Use slide on hose handle to
further adjust suction power.
4. To retract cord, press rewind
switch. Hold the plug to prevent it
from hitting you.
8
www.electrolux.com
All manuals and user guides at all-guides.com
1
4
Click
7
1
A
2
C
Click
5
9
8
2
Click
3
D
Click
6
Click
10
3
4