How To Assemble; How To Operate - Electrolux SILENT PERFORMANCE EL4012A Guia Del Propietario

USING THE CANISTER VACUUM CLEANER FOR THE FIRST TIME
ENGLISH

How to assemble

1. Press "Open" bar and raise cover.
2. Check to confirm that HEPA
s-filter (A) is in place.
3. Check to confirm that dust bag (B)
and motor filter (C) are in place.
4. Close cover. Press tabs on each
side of hose end (D) and rotate
until it snaps into place.
(To remove hose, press tabs on
each side and pull to release.)
5. Insert hose end (E) into hose
handle until it clicks into place.
(To remove hose handle, press
tabs and pull to release.)
6. Push hose handle into wand until
it clicks. (Press tab and pull to
release.)
7. To extend wand, push lever up
and pull.
8. Press tool caddy to clamp onto
upper section of wand; store
3-in-1 tool in caddy.
9. Push desired floor nozzle onto
wand until it clicks. (Press tab and
pull to release.)

How to operate

1. Pull out power cord and plug in.
2. Press on/off switch to start. Turn
dial on top of canister to select
desired suction power.
3. Use slide on hose handle to
further adjust suction power.
4. To retract cord, press rewind
switch. Hold the plug to prevent it
from hitting you.
8
www.electrolux.com
1
D
4
7
1
2
A
2 3
E
Click
5
8
B
C
Click
6
Click
9
3
4