INFOSEC UPS SYSTEM XP Pro evolution 1000 VA Guia Del Usuario página 3

Install the UPS in a temperature and humidity controlled indoor area free of conductive
interference.
It should not be exposed to direct sunlight or sources of heat. Do not cover the
ventilation grills.
Disconnect the UPS from AC power before cleaning with a damp cloth (no cleaning
products).
In an emergency situation, switch the UPS to the "Off" position and disconnect the unit
from the AC power supply.
When the UPS is out of order, please refer to "section 10: trouble shooting" and
contact the hot line.
Connected products:
The sum of the leakage current of the UPS and the connected equipment should not
exceed 3,5 mA.
Make sure that the connected load does not exceed the UPS capabilities: to ensure
improved backup time and longer battery life, we recommend a load equivalent to 1/3 of
nominal power.
Do not leave any recipients containing liquid on or near the UPS.
Do not plug the UPS input to its own output socket.
Do not plug the UPS into a power strip or surge suppressor.
The UPS has been designed for personal computers. It should not be used with
electrical or electronic equipment with inductive loads such as motors or fluorescent
lights.
Do not connect any household appliances such as microwaves, vacuum cleaners,
hair dryers or life-supporting systems to the UPS.
Due to excessive consumption, laser printers should not be connected to the UPS.
About batteries:
It is recommended that a qualified technician change the battery.
Do not dispose of the battery in a fire as it may explode.
Do not open or damage the battery. Released electrolyte can be toxic and harmful to
the skin and eyes.
The UPS contains one or two large-capacity batteries. The casing should not be
opened so as to avoid any danger of electric shock. If the battery needs servicing or has
to be replaced, please contact the distributor.
Servicing should be performed or supervised by competent personnel who take the
necessary precautions. Keep unauthorized personnel away from batteries.
A battery can present a risk of electric shock and cause short circuits. The following
precautions should be observed by the qualified technician:
1) Remove watches, rings or other metal objects from the hand.
2) Use tools with insulated handles.
3) Disconnect the charging source prior to connecting or disconnecting battery
terminals.
4) When replacing batteries, use the same type and number of sealed lead-acid
batteries.
4 . S T O R A G E I N S T R U C T I O N S
The UPS should be stored with its battery fully charged. In the event of long-term storage,
the batteries should be recharged once every 3 months for 24 hours (by plugging the UPS
into the mains power supply and switching "ON") to avoid any deterioration in battery
performance.
INFOSEC UPS SYSTEM - 4, rue de la Rigotière – 44700 Orvault – FRANCE - www.infosec-ups.com
Hot Line : tel : + 33 (0)2 40 76 15 82 - fax : + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 10 06 04 206 10
All manuals and user guides at all-guides.com
3