Storage; Disposal And Protection Of The Environment; Technical Data - Grizzly Tools ERT 3525 Traducción Del Manual De Instrucciones Original

GB
result in serious personal injury
and cause irreparable damage
to the trimmer and the guaran-
tee will become instantly null
and void.
1. Disconnect from the mains.
2. Turn the spool cover (15) to posi-
tion ( ) and remove the cover.
3. Remove the thread reel (10)
from the cutting head (9).
4. Thread the two ends of the
thread through the thread outlet
eyes (16) and place the replace-
ment thread reel on the cutting
head (9). Ensure that the spring
(17) is located correctly.
5. Place the spool cover (15) and
turn the cover to position ( ). It
clicks in audibly.
Check the line cutter. Never
operate the trimmer without the
line cutter or if the line cutter is
defective. Replace a defective
thread cutter. Risk of injury.

Storage

• Store the trimmer in a dry place well
out of reach of children.
• Do not expose the trimmer for extend-
ed periods to direct sunlight.
• Do not wrap plastic sacks around the
trimmer as this could result in the for-
mation of moisture and mould.
• Do not stand the trimmer on its pro-
tective cover. Suspend it by its upper
handle in such a manner that the pro-
tective cover does not come into con-
tact with other objects. This is because
the protective cover could become
deformed, thereby changing its dimen-
sions and its safety properties.
22
Disposal and protection
of the environment
Dispose of the trimmer, its accessories
and the packaging in an environment-
friendly manner.
Electrical appliances must not be
disposed of with the domestic waste
Hand in a redundant trimmer to a recy-
cling centre. The plastic and metals can
then be sorted out and graded for recy-
cling. Our Service Centre will be happy to
answer any questions in this respect.
Defective units returned to us will be dis-
posed of for free.

Technical data

Electric lawn trimmer ............ ERT 3525
Rated input voltage... 230 - 240 V~, 50 Hz
Power input..................................... 350 W
Idling speed ............................ 11500 min
Protection Class .................................
Protection category ........................... IP20
Weight without cable .......................1.4 kg
Dual line.......................6 m, tap automatic
Cutting circle dual line .............. 250 mm
Line thickness dual line ............. 1.2 mm
Sound pressure level
(L ) ......................81.7 dB(A), K
pA
Sound power level (L
guaranteed ............................ 96 dB (A)
measured ....... 93.6 dB(A); K
Vibration at the handle
(a ) ....................... 4.09 m/s
h
Noise and vibration values have been
determined according to the standards
and regulations mentioned in the declara-
tion of conformity. The vibration and noise
measuring processes in accordance with
EN 786, appendices D and E, were com-
pleted successfully.
=3 dB
pA
)
WA
=1.94 dB
WA
, K=1.5 m/s
2
-1
II
2