Use; Programs - oneConcept 10033098 Manual De Instrucciones

EN
16

USE

Start using
Plug the appliance to AC 220-240 V 50 - 60 Hz socket.
Push switch on the side of heater, the display light on.
Real time setting
• Press "ON/OFF", then press "SET" to set temperature by press "+" or
"-"when display flashing.
• Press "SET" 3 times , " "flashing set the day by press "+"or "-".
• Press "SET" 4 times, hour flashing set the hour by press "+"or "-".
• Press "SET" 5 times, minute flashing set the minute by press "+" or "-".
NOTE: The clock and calendar will be resent to factory default if without
power supply.
Heating mode
Press "MODE" choose P1, P2, P3, P4 by press "+"or "-".
Comfort mode is (22 °C)
ECO mode is 18 (18 °C)

PROGRAMS

P1 : (Monday - Sunday) is preset program
P2: (Monday - Friday) is preset program