Kohler K-704516 Guia De Instalacion página 11

14. Seal the Unit
Clean all the dust, dirt or grease from the bottom framework and the shower floor ledge. The areas
to be sealed must be clean and dry.
Carefully run a bead of silicone sealant around the outside of the shower door where the bottom
frame meets the shower receptor. Do not seal on the inside of the shower door.
IMPORTANT! Allow sealant to cure 24 hours before use.
Kohler Co.
Seal Here.
Seal Here.
Apply silicone
sealant here.
Bottom
Bridge
Member
11
Seal Here.
1024187-2-C