Skil ME9821-00 Manual Del Propietário página 21

NOTE: During continuous measurement, when the wheel measuring
symbol is blinking, press the Side Button
succession, you could clear the current measurement and return to
the initial display with all dashes (Fig.13).
Fig. 13
Note: In order to obtain an exact measurement, try to hold a
consistent angle between the measuring tool and the tested surface.
Make sure that you apply a steady amount of pressure throughout
the measuring process. The result may vary on soft substrates and/
or when applying excessive pressure.
Area measurement
Press the Main Button
last two measurements together. The area measurement symbol
appears on the display and the area measurement is shown (Fig.14).
Fig. 14
2x
twice in quick succession to multiply the
2x
twice in quick
21