Logitech QuickCam Sphere Manual Del Usuario página 6

2 2
Installing the Software
1. Install the software
2. Follow the on-screen instructions.
3. During software installation, you are prompted to connect
the camera to the computer's USB port. Connect the USB cable
when instructed to do so, but not before.
4. Complete software installation.
3 3
Positioning the Camera
1. Tabletop Placement. The camera can be placed on a tabletop next to your computer monitor.
Use the camera on its base, or use the stand to raise the camera to your eye level.
2. Monitor Placement. If there is a flat, stable surface on top of your monitor, place the camera
on the base in the middle of your monitor. You don't need to use the stand on your monitor.
3. Camera Rotation. Do not manually rotate the camera on the base or on the stand.
You could damage the camera. Use your mouse or keyboard to pan and tilt the camera.
Or activate face-tracking for automatic camera movements. Refer to "Tips" in this manual.
2
English
All manuals and user guides at all-guides.com
FIRST
.
Wait until you receive the software
prompt before you connect
the camera's USB cable to a USB port
on the computer.