Functional Description - Bosch PST 650 L Instrucciones De Servicio

OBJ_BUCH-2 609 000 687-001.book Page 3 Tuesday, February 1, 2005 3:50 PM

Functional Description

Read all instructions. Failure to fol-
low all instructions listed below may
result in electric shock, fire and/or seri-
ous injury.
Save these instructions.
Intended Use
The machine is intended for making separating cuts
and cut-outs in wood, plastic, metal, ceramic plates and
rubber while resting firmly on the workpiece. It is suita-
ble for straight and curved cuts with mitre angles to
45°. The saw blade recommendations are to be
observed.
Noise/Vibration Information
Measured values determined according to EN 60745.
Typically the A-weighted sound pressure value of the
machine is 83 dB(A). Measuring uncertainty K=3 dB.
The noise level when working can exceed 85 dB(A).
Wear hearing protection!
The typically weighted acceleration is 3,5 m/s
Technical Data
Jigsaw
Article number
Stroke rate control
Adjustable laser line
Laser type
Laser class
Operating and storage temperature
Rated power input
Stroke rate at no load
Stroke
Cutting capacity, max.
in wood
in aluminium
in non-alloy steel
Bevel cuts (left/right), max.
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific coun-
tries, these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.
2 609 000 687 • 1.2.05
All manuals and user guides at all-guides.com
Machine Elements
The numbering of the machine elements refers to the
illustration of the machine on the graphics page.
1 Lock-on button for On/Off switch
2 On/Off switch
3 Vacuum hose*
4 Vacuum connection
5 Saw blade storage*
6 Base plate
7 Switch for sawdust blowing device
8 Scale for mitre angle
9 Guide roller
10 SDS clamping lever for saw blade release
11 Saw blade*
12 Cutting line mark
13 Contact protector
14 Stroke rod
15 Dust cover for vacuuming*
16 Laser beam outlet
17 Control knob for adjustment of the laser line
18 Laser line On/Off switch
19 Splinter guard*
20 Screw
21 Holder for guide roller
2
.
22 Lead for the parallel guide
23 Locking screw for parallel guide*
24 Parallel guide with circle cutter*
25 Centring tip of the parallel guide*
*Not all of the accessories illustrated or described are
included as standard delivery.
English–3
PST 650 L
3 603 C92 2..
–
nm 635
mW <1
2
°C 0...+40
W 500
spm 3100
mm 22
mm 65
mm 8
mm 3
° 45
kg 1.7
/ II
PST 680 EL
3 603 C92 3..
635
<1
2
0...+40
500
500 – 3100
22
68
10
4
45
1.7
/ II