META SMARTACT evo Manual Del Usuario página 9

Connecting the handpiece to the pedal
Connect the end (the one with the
cable cover) of the connection cable
(B) to the handpiece**
Connect the other end of the
connection cable (B) to the pedal
(A) in the same way as described in
Photos 10 and 11.
The compressed air cable can be
disconnected from the pedal by
pushing the coupling downward and
pulling the cable
Connect the end of the compressed air cable (C) to the compressed air supply
** Take care to insert the smaller diameter connection fitting into the smaller diameter coupling and the larger diameter fitting
into the larger diameter coupling.
SMARTACT
evo
10
Push the tubes leading from the
connection cable fully into place in
the handpiece couplings
13
The tubes can be disconnected
from the pedal or handpiece
by pushing the coupling block
downward and pulling the cable
16
Set the operating pressure to not
less than 4 bar (maximum permitted
6 bar)
SMARTACT
11
Screw the cable cover on the
connection cable (B) to the base of
the handpiece
14
Connect the end of the compressed
air cable (C) to the side coupling
of the pedal (A) pushing it fully into
place
17
evo
12
15
9