MOB MO8602 Manual De Instrucciones página 3

anuals and user guides at all-guide
MO8602
EN
Powerbank
•
Make sure the power bank is fully charged before use.
•
Charging electronic digital equipment:
Please choose a suitable connector according to the
requirements of your electronic device. Whilst your device is
connected to the power bank, it will begin charging
automatically, if the power bank is charged. Please unplug the
charging wire after the digital product is fully charged.
•
Caution: The output power of the power bank is 5V/1A, please
check input specification of your product before charging with
the power bank.
Charging power bank:
Connect the power bank with a DC USB port. Plug the micro USB
end of the cable into the power bank. When charging, the indicator
light flashes red and blue alternately. When the indicator light
turns red and static, that means the power bank is fully charged.
Specification:
Input:
Output:
Capacity:
Power efficiency:
Charging time:
Cycle life:
Protection voltage: 5.5V
•
When connecting the power bank to the device, please use
charging cables and connectors provided from the authorized
maker. The use of charging cables or connectors from
unauthorized makers may cause severe or fatal injuries and
property loss and damage to the product and the device.
•
Power Bank is compatible with Apple® Product USB Cable/
adapter (Not Included).
•
If the product does not start charging when it connects to the
DC5V/1A
5V/1A
2200mAh
70%
4-5 hours approximately
500 times