Uline H-1131 Manual De Instrucciones página 3

1. Open dispenser cover completely.
(See Figure 5)
2. Push a roll of product into the holders and release
when the core becomes engaged. Ensure that the
paper feeds from beneath the roll. (See Figure 8)
Figure 8
1. When the main roll reaches a diameter of
approximately 3" it may be used as a stub roll.
Remove the main roll from the upper roll holders
and lock it onto the lower roll holders.
(See Figure 10)
2. Drape paper over the black rubber roller. Load the
main roll as previously described on page 2.
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
PAGE 3 OF 9
LOADING INSTRUCTIONS
STUB ROLL LOADING INSTRUCTIONS
1-800-295-5510
uline.com
3. Drape the paper over the black rubber roller and
close the cover firmly until it locks. (See Figure 9)
Figure 9
4. Begin dispensing.
Figure 10
0218 IH-1131