Mounting Instructions - Uline H-1131 Manual De Instrucciones

NOTE: Recommended mounting height is 45"
from the floor to bottom of dispenser.
NOTE: Ensure that proper mounting hardware
is used for appropriate wall composition as
enclosed hardware may not be compatible
with your wall surface.
1. Insert the key into the lock opening on the bottom of
dispenser and rotate clockwise until the cover pops
open. (See Figure 4)
2. Open dispenser cover and hold dispenser to ideal
mounting place on wall. (See Figure 5)
3. Mark the holes on the wall where screws will be
inserted. (See Figure 6)
4. Drill into wall at five marked locations with an
appropriate drill bit. (See Figure 7)
5. Hold dispenser to wall so holes in dispenser match
up with previously drilled holes in wall. Insert wall
anchors and screws. (See Figure 6)
PAGE 2 OF 9

MOUNTING INSTRUCTIONS

Figure 4
Figure 5
Figure 6
Figure 7
0218 IH-1131