Before Installation - Sony SU-W110 Manual De Instrucciones

Before installation

Before installation, be sure to refer to
the Leaflet ("Installing the Wall-
Mount Bracket") supplied with the
TV.
Step 1: Checking the
parts required for the
installation
Check all the parts are included in the
package.
Bracket A (1)
Bracket B (1)
8
(GB)
Decide the location on the wall to install
the TV.
Then, place bracket A on the installation
location and mark the four screw holes
on the wall using a pencil.
Before marking, make sure that the
distance between the upper edge of
bracket A and the ceiling and that
between the side edge of bracket A and
the side wall are 20 cm (7
more.
20 cm
(7
inches) or
more
Screws (2)
Note
• Attach bracket A level with the floor.
• The wall should be capable of supporting a
Step 2: Deciding on
the installation
location
Bracket A
7 /
8
weight of at least four times the TV weight.
Before installing, confirm that the wall has
sufficient strength to support the TV and
the Wall-Mount Bracket. If the wall does
not have sufficient strength, reinforce it
adequately before installing.
7 / inches) or
8
Ceiling
20 cm (7 7 / inches) or
8
more
Mark this
portion using
a pencil.
Wall