Human Touch SUPER NOVO Manual De Instrucciones página 11

Complete the Chair Assembly
1. If you haven't already plugged the power cord into the chair (while
reinstalling the side panels), do so now, then plug the other end of
the power cord into a grounded 120-volt outlet.
2. Turn the power switch on the rear of the chair to On (Fig.22).
3. Remove the rubber plug from the remote/phone holder socket (Fig.23).
4. Insert the remote/phone holder into the socket, then turn it clockwise it drops all the way into the socket, flush with the arm panel (Fig.24).
(Fig.23)
Rubber plug
(Fig.22)
(Fig.24)
11