Energizer EZG Serie Manual De Instrucciones página 114

Ocultar thumbs Ver también para EZG Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25
*Use gasoline conditioners that are formulated to extend storage life.
Contact your authorized generator dealer for conditioner recommendations.
1) Drain the carburetor by loosening the drain screw. Drain the gasoline into a suitable container.
WARNING
Gasoline is extremely flammable and is explosive under certain conditions. Perform this task in a well
ventilated area with the engine stopped. Do not smoke or allow flames or sparks in the area during this
procedure.
The fuel of this machine is combustible and deflagrating. After the machine has been shut down, the additional fuel
must be treated properly and the local environmental requirements must be met.
2) Change the engine oil
3) Remove the spark plug, and pour about a tablespoon of clean engine oil into the cylinder. Crank the engine
several revolutions to distribute the oil, then reinstall the spark plug.
4) Slowly pull the starter grip until resistance is felt. At this point, the piston is coming up on its compression stroke
and both the intake and exhaust valves are closed Storing the engine in this position will help to protect it from
internal corrosion.
The disassembled or damaged machine must be transferred to the professional organ for processing. Please
make sure that the fuel and lubricant inside the machine have already been drained. Some parts of the machine
are potentially dangerous for children. Place and handle all parts properly to avoid children reaching.
with fresh gasoline before starting.
Align the notch on the starter pulley
with the hole at the top of recoil starter.
EN
A
l

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ezg3000Ezg3000uk

Tabla de contenido