trekstop DataStation maxi t.u Manual De Instrucciones página 5

OPERATING INSTRUCTIONS
Thank you for buying the TrekStor DataStation. We are confident that this product will be the source of much
enjoyment.
1) Connect the TrekStor DataStation to a PC
Note for users of Windows® 98 (SE):
First install the driver before connecting the DataStation to your PC!
• Insert the provided CD into the CD ROM drive of your PC.
• Select the desired language by clicking a flag on the right; the TrekStor menu then appears in a dialog window.
• Click "D W
RIVER FOR INDOWS
• Restart your PC to activate the installed driver.
Note for users of Windows® ME, 2000, XP, and Mac OS X:
A driver is not necessary for these operating systems. If you use Windows® 2000, make sure that you have installed at least
service pack 4, and Windows® XP requires service pack 2 or above.
Insert the provided power supply into an electrical outlet, and connect the cable to the "P
DataStation. Use the provided USB connection cable to connect the DataStation to a USB port in your PC. Turn on
the DataStation with the on/off switch ( ). Your operating system will immediately recognize the DataStation
and will add a "L D
OCAL
2) Exchanging data with the TrekStor DataStation
• Select the desired files or folders with your mouse. Copy these files by clicking them with your right mouse button
and then selecting "C
• Under "M C ", select the local disk "T
Y OMPUTER
• Click it with your right mouse button, and select "P
available on the DataStation.
® 98", and follow the installation instructions.
" ("L D ") under "M
ISK OCAL RIVE
".
OPY
S
REK
C ".
Y OMPUTER
".
TOR
" to start copying. After copying is over, the data will be
ASTE
– 5 –
" connection of the
OWER
EN