Moser 1588 Manual De Instrucciones página 10

ENGLISH
Operation
de
Preparation
en
Keep the packaging material for safe storage
or transport later.
fr
f Check that the contents are complete.
it
f Check all the parts for possible transport damage.
es
Safety
Handle with care! Damage due to incorrect
pt
power supply.
nl
f Only operate the appliance with the voltage
stated on the nameplate.
da
Charging the battery
sv
1. Connect the appliance plug (H) on the plug-in trans-
former to the charging stand socket (E) (Fig. ⓐ).
no
· The appliance can also be connected
fi
directly to the plug-in transformer for charg-
ing (Fig. 2ⓐ/ⓑ).
tr
· Battery overcharging is prevented thanks to
intelligent charge management.
pl
2. Connect the plug-in transformer to the mains socket
cs
(Fig. 4ⓑ).
3. Switch off the appliance using the on/off switch
sk
(Fig. 3).
hr
4. Place appliance in the charging stand (Fig. 4)
or connect directly to the plug-in transformer
hu
(Fig. 2ⓐ/ⓑ). The charging process starts.
sl
· During the charging operation, the on/off
switch (B) flashes white. The on/off switch
ro
is illuminated when the battery is fully
charged.
bg
· The accuracy of the battery power indica-
tor can be increased by fully discharging
ru
the battery from time to time and then
recharging it in one uninterrupted charging
uk
process.
· It should take around 30 minutes for the
et
appliance to charge to full capacity.
lv
5. Once the battery is fully charged, the on/off switch
will be illuminated.
lt
el
ar
10
All manuals and user guides at all-guides.com
Battery operation
1. Switch on the appliance using the on/off switch
(Fig. 3).
· The appliance has three speed settings
S1 – S3.
· The desired speed setting can be selected
by keeping the on/off switch pressed. The
appliance changes the speed setting every
two seconds. Release the on/off switch
when the desired speed setting has been
reached.
· When the appliance is switched on, it is set
to the speed setting used last.
2. Select the desired speed by keeping the on/off
switch pressed (Fig. 3) and then release it when the
desired speed setting has been reached.
· The battery operating time depends on
the selected speed setting and blade set
maintenance. It should be from approx. 80
minutes to max. 90 minutes.
· The battery power indicator on the on/off
switch (B) will start flashing when the bat-
tery has < 5% power remaining. The bat-
tery needs to be recharged.
· In case of insufficient maintenance of
the blade set, the operating time can be
reduced considerably.
3. Use the on/off switch to switch off the appliance
after use (Fig. 3).
Mains operation
1. Connect the appliance plug (H) on the plug-in trans-
former to the appliance socket (C) (Fig. 2ⓐ).
2. Connect the plug-in transformer to the mains socket
(Fig. 2ⓑ).
3. Switch on the appliance using the on/off switch
(Fig. 3).
4. Select the desired speed by keeping the on/off
switch pressed (Fig. 3).
5. Use the on/off switch to switch off the appliance
after use (Fig. 3).