Moser 1588 Manual De Instrucciones página 11

Operation
Cutting with the attachment comb
The appliance can also be operated with an attach-
ment comb.
f The attachment comb has 5 detent positions for
adjusting the cutting length.
f The further the attachment comb is pushed onto the
blade set, the shorter the cutting length.
The cutting length can be adjusted from 3 mm
(Fig. 6ⓐ) to 6 mm (Fig. 6ⓑ).
Attaching/removing the attachment comb
1. Slide the attachment comb onto the blade set
(Fig. 5ⓐ) in the direction of the arrow until it locks
in place.
2. The attachment comb can be removed by pushing it
in the direction of the arrow (Fig. 5ⓑ).
Maintenance
Warning! Injuries and material damage due
to incorrect handling.
f Switch off the appliance before cleaning it
or performing any maintenance and discon-
nect it from the mains.
Cleaning and care
Danger! Electric shock due to penetration
of liquid.
f Do not immerse the appliance in water!
f Do not allow any liquid to get inside the
appliance.
f Only reconnect the appliance to the power
supply if it is completely dry.
Handle with care! Danger from aggressive
chemicals.
Aggressive chemicals could damage the appli-
ance and accessories.
f Never use solvents or scouring agents.
f Only use cleaning agents and blade set oil
recommended by the manufacturer.
Accessories and spare parts are available from
your dealer or our service centre.
All manuals and user guides at all-guides.com
f Remove the attachment comb (Fig. 5ⓑ) and lift
f Only wipe the appliance with a soft, slightly damp
f Clean the blade set regularly using the hygienic
f Oil the blade set with the blade set oil (Fig. 9).
Changing the blade set
1. Switch the appliance off using the on/off switch
2. Slide the blade set off the housing in the direction of
3. Replace the blade set by hooking it into the hous-
the blade set out of the housing (Fig. 7ⓐ). Use the
cleaning brush to remove any cut hairs from the
housing opening and from the blade set (Fig. 8).
cloth.
spray.
· For a good and long-lasting cutting perfor-
mance, it is important to oil the blade set
frequently
· If the cutting performance deteriorates after
long use despite regular cleaning and oil-
ing, the blade set should be replaced.
(Fig. 3) and disconnect from the power supply.
the arrow (Fig. 7ⓐ). Remove the blade set.
ing and pressing it down until it clicks into position
(Fig. 7ⓑ).
ENGLISH
de
en
fr
it
es
pt
nl
da
sv
no
fi
tr
pl
cs
sk
hr
hu
sl
ro
bg
ru
uk
et
lv
lt
el
ar
11