requires a charging period of approximately 0.5 to 1 hour.
FUNCTIONS
• Insertion and removal of rechargeable battery
• Depress the battery-release button located on the front of the battery pack to release battery pack.
• Pull the battery pack out and remove it from the tool.
WARNING: Always remove the battery pack before making adjustments to the equipment.
Be sure to read the following information before you put the cordless equipment into operation:
battery pack requires a charging period of approximately 0.5 to 1 hour.
FITTING THE DUST BAG
• Fit the dust bag (6) on the dust extractor adapter by twisting it
gently as far as the notch.
• The dust is extracted directly into the dust bag (6) through the
abrasive paper and the oscillating plate (5).
• Twist and pull the dust bag simultaneously to remove it again.
CAUTION: For health reasons it is imperative that you use the dust collection box or a dust extraction system. For others material, always work
with the dust extraction device!
CAUTION: For health reasons it is imperative that you use the dust collection box or a dust extraction system. For others material, always
work with the dust extraction device!.
FIT AND REMOVE THE SANDING SHEET
• Perforated sanding sheets are used for dust suction. Please always
make sure the sheet corresponds with perforation in sanding foot.
• Always use the tool with the total sanding surface covered with
sanding paper.
• Change the sanding sheet regularly. Do not continue to use worn, torn
or heavily clogged sanding sheets.
• The self-adhesive sheet can be stuck on sanding surface directly
andcan be peeled away from the base simply.
DUST SUCTION
• Empty dust bag regularly for optimal dust pick-up performance.
WARNING: When sanding metal, sparks are generated; do not use dust bag and keep other persons and combustible material from work area.
SWITCHING ON/OFF
Switch on the equipment
Switch Off
Instruction manual
REF.
Charge the battery pack with the charger. An empty
Lower speed
08780
ES
PT
EN
FR
Higher speed