Cleaning And Maintenance - EDM 08780 Manual De Instrucciones

WORKING WITH THE ECCENTRIC GRINDR/SANDER
ES
• Place the whole surface area of the sanding disk on the material.
• Switch on the machine and move it with gentle pressure over the
workpiece, making circular or transverse and linear movements.
PT
• Use a coarse grit for coarse sanding and a finer grit for finish sanding.
You can find the best grit size for the job by carrying out sanding tests.
Caution: The dust wich are formed while the equipment is
EN
being used may be a health hazard.
• Always wear safety goggles and a dust mask during sanding work.
• All persons who work with the equipment or enter the workplace
FR
must wear a protective dust mask.
• Eating, drinking and smoking are prohibited at the workplace.
• Paints containing lead are not allowed to be used!.

CLEANING AND MAINTENANCE

DANGER! Always pull out the mains power plug before
startingany cleaning work.
1
2
Instruction manual
CLEANING
MAINTENANCE
STORING
1. Speed control button
2. Off switch
3. Release button(battery pack)
4. 4.0Ah Battery
• Keep all safety devices, air vents and the motor housing free of dirt
and dust as far as possible. Wipe the equipment with a clean cloth
or blow it with compressed air at low pressure. We recommend
that you clean the device immediately each time you have finished
using it.
• Clean the equipment regularly with a moist cloth and some soft
soap. Do not use cleaning agents or solvents; these could attack
the plastic parts of the equipment. Ensure that no water can seep
into the device. The ingress of water into an electric tool increases
the risk of an electric shock.
• There are no parts inside the equipment which require additional
maintenance.
• Store the machine, operating instructions and where necessary the
accessories in the original packaging.
• In this way you will always have all the information and parts ready
to hand.
• Pack the device well or use the original packaging in order to avoid
transit damage.
• Always keep the machine in dry place.
3
6
08780
REF.
4
5
5. Dust bag
6. Oscillating plate
*PLEASE NOTE: Battery &
Charger sold seperately.