Sauder 410147 Instrucciones De Montaje página 17

Step 12
Peel the double-sided TAPE from the TAPE CARD (U).
å
Apply fi ve pieces of TAPE to the DRAWER FRONT (K).
NOTE: You may want to crease the fl ap on the DRAWER
å
BOTTOM (J) before applying the BOTTOM to the
DRAWER FRONT (K).
Press the fl ap of the DRAWER BOTTOM (J) onto the
å
DRAWER FRONT (K).
Fasten the DRAWER BACK (L) to the DRAWER SIDES (M).
å
Use two BLACK 1-1/4" FLAT HEAD SCREWS (AA).
Repeat this step for the other drawer.
å
www.sauder.com/services
Flap
J
The fi nished surface should be
facing the DRAWER FRONT (K).
BLACK 1-1/4" FLAT HEAD SCREW
(4 used in this step)
L
M
Flap
J
410147
U
K
AA
Finished edge
M
K
Page 17