Turning The Appliance On And Off; Using The Appliance - Gamma Piu X-EVO GPXEVOMS Manual De Uso Y Garantía

starts flashing or the appliance emits one or more sound signals, indicating that the
appliance is running low.
The appliance can be charged by connecting the feeder directly to the appliance
or by connecting it via the base I (fig. 1) or by using the mini USB cable E (fig. 1).
1) Direct connection: connect the feeder connector F (fig. 1) to the port at the
bottom of the appliance C (fig. 1).
2) Connection through base: insert the appliance into the base I (fig. 1) and the
feeder connector F (fig. 1) into the port at the bottom of the base.
3) In both cases, connect the other end of the feeder to the mains power supply.
4) When charging the LED of the appliance B (fig. 1) will flash. When charging is
completed, the LED will be steady.
If it is not possible to connect the feeder to a compliant mains socket, the unit can be
charged using the supplied mini USB cable E (fig. 1), connected to a suitable power
source. The charging time using the mini USB cable will be longer.
Fully charge the appliance at least once a year.
USE
ATTENTION! Do not use the appliance if the blades of the heads A (fig.1)
are damaged or if the blade block is not working correctly.
Do not use the appliance on wet hair.

TURNING THE APPLIANCE ON AND OFF

Turning on and off
• Press switch B (fig. 1).
USEFUL TIPS FOR CUTTING
• Wash the hair as usual, dry and brush it in the direction of growth to untangle any knots.
• After drying, do not use hairspray, mousse or gel.
• Start with the larger size distance comb G (fig. 1), and gradually reduce the size
until you get the desired result.
• For best results, use the appliance against the direction of hair growth.
• If hair starts to clog the adjustable guide comb, remove the comb from the
appliance (see par. "Removing the adjustable guide comb") and clean away
the hair (blow and/or brush it out).

USING THE APPLIANCE

Using the distance comb
Check that the appliance is off.
Place the comb G (fig. 1) on the cutting edge of the head A (fig. 1) and press it until it
engages the lower part of the head itself, by applying force towards the handle (fig. 2).
• Turn on the device.
• Cut the hair; for tips see par. "USEFUL CUTTING TIPS".
Turn off the appliance before changing or inserting any accessories.
15