Gamma Piu X-EVO GPXEVOMS Manual De Uso Y Garantía página 17

• After unscrewing and releasing the head, loosen the internal screws T (fig. 4).
• Move the blade until you reach the desired distance a (fig. 4).
• Before tightening the screws, check that the mobile blade is aligned laterally
to the fixed blade (Fig. 4 – b/c) and align the fixed blade so that between the
front edge of the fixed blade and the front edge of the mobile blade there is a
minimum distance of 0.1-0.5 mm (Fig. 4 - a) to avoid the risk of skin injuries when
using the appliance.
• Firmly tighten the internal screws T (fig. 4).
• Re-check the alignment of the cutting comb and repeat again if the alignment is
not optimal or safe.
• Re-attach the head of the body as previously explained.
• Before using the appliance, check that it is working properly.
Lubrication
It is recommended to lubricate the blade unit daily or after every use.
To ensure that the cutting blade remains sharp, the cutting head must be lubricated.
It is recommended to regularly apply two to three drops of lubricant M (fig. 1) directly
on the blade (fig. 5).
If after a long period of use, and despite constant cleaning and oiling,
the cutting performance decreases, the head must be replaced.
Failure to lubricate the appliance is considered as "FAILURE TO COMPLY WITH
THE INSTRUCTIONS FOR USE", therefore, the warranty will be automatically
rendered null and void.
DISPOSAL
The product packaging is made of recyclable materials. Separate the parts
according to their type and dispose of them in accordance with applicable
laws on the environmental protection.
INFORMATION TO USERS in accordance with Legislative Decree No.49
of 14 March 2014 "Implementation of Directive 2012/19/EU on waste
electrical and electronic equipment (WEEE)"
The crossed bin symbol on the appliance indicates that at the end of its life-
span, the product must be collected separately from other waste. The user
must deliver the appliance, with the essential components, at the end of its
life-span, to the appropriate separate collection centres for electronic and
electrotechnical waste, or return it to the dealer when a new applicable of
equivalent type is purchased, at the rate of one to one, or 1 to zero for
appliances with longer side of less than 25 mm. Adequate separate collection
for subsequent start of the appliance discharged to recycling, treatment and
compatible environmental disposal helps to avoid possible negative effects
on the environment and on health and favours the recycling of the appliance
materials. Illegal disposal of the product by the user involves the application
of administrative sanctions as per Legislative Decree no. Legislative Decree
No.49 of 14 March 2014.
17