Installation - BUTSIR ATRIO Manual De Instrucciones

INSTALLATION

This Gas Fire Pit must be installed on flat, stable surface, away from any combustible materials or construc-
tion.
Remove fire pit from a carton and remove cylinder cargo
●
from another carton, place them on any level, non-
combustible surface.(see the picture 1)
•Place the lava rocks on the burner and around the burner
●
evenly, then tight (see the picture2)
Unscrew the button cap of ignite, put a piece
●
of AAA battery into ignite compartment with
anode outward, then screw the button cap(see
picture 3)
Open the door ,and Take down the lid of cylinder cargo carefully and put it in the center of the tank
●
bracket (See the picture 6-7)
Locate the hose out of the pathways where people may trip over it or in areas where the hose may be
●
subjected to accidental damage.
CAUTION: Do not kink flexible gas hose. If it is kinked, a gas leak could occur.
Manual ATRIO.indd 23
1
2
3
23
30/4/21 13:29