Technical Information - SKYLOTEC Safety Roll AGR 2000 Instrucciones De Uso

NOTE: The manufacturer's product liability does not include damage to property
and personal injury, which may occur even if the equipment functions properly
and even if there is proper use of personal protective equipment to prevent fal-
GB
ling.
The manufacturer's extended product liability shall cease to apply if any changes
or modifications are made to the equipment or in the event of non-compliance
with these instructions or with the accident prevention regulations in force.

18. Technical information

18.1 Safety Roll AGR 2000
Scope of supply Standard/Entry level
Safety Roll basic device (without rope)
Weight:
Material:
Standard:
Braking principle:
Maximum abseiling height:
Maximum load:
Rope clamp:
Coated core rope
Name:
Material:
Rope diameter:
Weight:
Breaking load
without end connection:
Breaking load
with end connection:
Impregnation:
Abseiling work:
- the permissible load is 150kg (without reduction)
- the maximum abseiling height is 150m
40
approx. 2kg
anodized aluminium
EN 341, Class A, EN 1496
wrap
150m
1 person (150kg) on single rope
2 persons if reduction is used
Reduction: 1:3 with entry level version
optionally 1:1 to 1:5 with standard version
aluminium
Dynamic Longlife
Polyamide
9mm
54g/m
approx. 17 kN
approx. 15 kN
Ever Dry