Layout; Items Supplied; Intended Use; Technical Data - EINHELL GE-EH 6056 Manual De Instrucciones

Anleitung_GE_EH_6056_SPK8__ 21.02.13 15:51 Seite 18
GB
Explanation of the warning signs on the
equipment (see Fig. 11)
1. Warning!
2. Do not expose the hedge trimmer to rain or wet
conditions.
3. CAUTION - Read the operating instructions to
reduce the risk of inquiry.
4. If the cable is damaged or cut, pull out the power
plug from the mains immediately.
5. Wear eye protection and ear plugs.
2. Layout (Fig. 1)
1. Cutter rail
2. Hand guard
3. Steady grip with button switch
4. Handle with button switch
5. Cable strain-relief clamp
6. Power cable
7. Cutter guard
8. Fastening screws for cuttings collector
9. Cuttings collector

3. Items supplied

Open the packaging and take out the equipment
n
with care.
Remove the packaging material and any
n
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
n
Inspect the equipment and accessories for
n
transport damage.
If possible, please keep the packaging until the
n
end of the guarantee period.
IMPORTANT
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts. There is a danger of
swallowing or suffocating!
Hedge trimmer
n
Cutter guard
n
Cuttings collector
n
Original operating instructions
n
18

4. Intended use

Important. This hedge trimmer is suitable for cutting
hedges, bushes and shrubs.
The equipment may only be used for the tasks it is
designed to handle. Any other use is deemed to be a
case of misuse. The user/operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.

5. Technical data

See warranty card of your country.
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Vibration emission values (vector sum of three
directions) determined in accordance with EN 60745.
Warning!
The specified vibration emission value was
established in accordance with a standardized testing
method. It may change according to how the electric
equipment is used and may exceed the specified
value in exceptional circumstances.
The specified vibration emission value can be used to
compare the equipment with another electric power
tools.
The specified vibration emission value can be used
for initial assessment of a harmful effect.