Layout And Items Supplied - EINHELL GE-LM 36/4in1 Li Manual Del Usuario

Safety instructions for hedge trimmers
Hedge trimmer safety warnings:
a) Keep all parts of the body away from the
blade. Do not remove cut material or hold
material to be cut when blades are moving.
Blades continue to move after the switch
is turned off . A moment of inattention while
operating the hedge trimmer may result in
serious personal injury.
b) Carry the hedge trimmer by the handle with
the blade stopped and taking care not to
operate any power switch. Proper carrying of
the hedge trimmer will decrease the risk of
inadvertent starting and resultant personal
injury from the blades.
c) When transporting or storing the hedge
trimmer, always fi t the blade cover. Proper
handling of the hedge trimmer will decrease
the risk of personal injury from the blades.
d) When clearing jammed material or servicing
the unit, make sure all power switches
are off and the battery pack is removed or
disconnected. Unexpected actuation of
the hedge trimmer while clearing jammed
material or servicing may result in serious
personal injury.
e) When clearing jammed material or servicing
the unit, make sure all power switches are
off and the lock-off is in the locked position.
Unexpected actuation of the hedge trimmer
while clearing jammed material or servicing
may result in serious personal injury.
f) Hold the hedge trimmer by insulated gripping
surfaces only, because the blade may contact
hidden wiring. Blades contacting a "live" wire
may make exposed metal parts of the hedge
trimmer "live" and could give the operator an
electric shock.
g) Keep all power cords and cables away from
cutting area. Power cords or cables may
be hidden in hedges or bushes and can be
accidentally cut by the blade.
h) Do not use the hedge trimmer in bad weather
conditions, especially when there is a risk
of lightning. This decreases the risk of being
struck by lightning.
SAVE THESE INSTRUCTIONS
Anl_GE_LM_36_4in1_Li_SPK7_USA.indb 22 Anl_GE_LM_36_4in1_Li_SPK7_USA.indb 22
EN
Explanation of the symbols (Fig. 55):
1. Warning!
2. Read the directions for use before operating
the equipment!
3. Wear protective headgear and goggles!
4. Wear protective earmuff s!
5. Wear sturdy, non-slip footwear!
6. Electric shock can cause fatal injury. Keep a
distance of at least 33 ft (10m) from power
cables.
7. Wear protective gloves
8. Keep your hands away from the blade
9. Watch out for falling and catapulting parts
10. Keep your distance.
11. Protect the tool from rain and damp!
12. Direction of chain movement and teeth
13. Maximum cutting length
14. Bystanders must keep a distance of at least
50 ft (15m) from the tool.

2. Layout and items supplied

2.1 Layout
1. Battery mount
2. On/Off switch
3. Switch lock
4. Handle
5. Harness holder
6. Wing nut
7. Steady grip holder
8. Union nut
9. Connecting tube
10. Lock release
11. Oil tank cap
12. Motor unit (unit with tube)
13. Extension pipe
14. String trimmer / brush cutter module (unit with
connecting tube)
15. Telescoping pole chain saw module
16. Hedge trimmer module
17. Complete steady grip
18. Handle screw
19. Side steady grip
20. Harness with safety release
21. Saw chain
22. Cutter rail
23. Cutter rail guard
24. Guard for hedge trimmer blade
25. Key for telescoping pole chain saw
26. Guard hood
27. String blade guard hood
28. Key for string trimmer/brush cutter
29. Cutting blade
- 22 -
29.09.2021 09:33:54 29.09.2021 09:33:54