Access Codes - LG C1150 Manual De Usuario

General functions

Access codes

You can use the access codes described in this
section to avoid unauthorized use of your phone.
The access codes (except PUK and PUK2 codes) can
be changed by using (Menu 4.4.5).
PIN code (4 to 8 digits)
The PIN (Personal Identification Number) code
protects your SIM card against unauthorized use.
The PIN code is usually supplied with the SIM card.
When PIN code is set On, your phone will request
the PIN code every time it is switched on. On the
contrary, when PIN code is set Off, your phone
connects to the network directly without the request
PIN code.
PIN2 code (4 to 8 digits)
The PIN2 code, supplied with some SIM cards, is
required to access some functions such as Advice of
call charge, Fixed Dial number. These functions are
only available if supported by your SIM card.
26
PUK code (4 to 8 digits)
The PUK (PIN Unblocking Key) code is required to
change a blocked PIN code. The PUK code may be
supplied with the SIM card. If not, contact your local
service provider for the code. If you lose the code,
also contact your service provider.
PUK2 code (4 to 8 digits)
The PUK2 code, supplied with some SIM cards, is
required to change a blocked PIN2 code. If you lose
the code, also contact your service provider.
Security code (4 to 8 digits)
The security code protects the unauthorized use of
your phone. It is usually supplied with the phone.
This code is required to delete all phone entries and
to activate "Reset settings" menu. The default
number is "0000".