Network Settings; Gprs Setting - LG C1150 Manual De Usuario

Settings
1. If you want to change the Security code/PIN2
code input your original code, and then press
[OK].
2. Input new Security code/PIN2 code and verify
them.

Network settings

You can select a network which will be registered
either automatically or manually. Usually, the
network selection is set to Automatic.
Automatic
If you select Automatic mode, the phone will
automatically search for and select a network for you.
Once you have selected "Automatic", the phone will
be set to "Automatic" even though the power is off
and on.
Manual
The phone will find the list of available networks and
show you them. Then you can select the network
which you want to use if this network has a roaming
agreement with your home network operator.
52
The phone lets you select another network if the
phone fails to access the selected network.
Preferred
You can set a list of preferred networks and the phone
attempts to register with first, before
attempting to register to any other networks. This list
Menu 4.5
is set from the phone's predefined list of known
networks.

GPRS setting

You can set GPRS service depending on various
(Menu 4.5.1)
situation.
Power on
If you select this menu, the phone is automatically
registered to a GPRS network when you switch the
phone on. Starting a WAP or PC dial-up application
created the connection between phone and network
(Menu 4.5.2)
and data transfer is possible. When you end the
application, GPRS connection is ended but the
registration to the GPRS network remains.
(Menu 4.5.3)
Menu 4.6
(Menu 4.6.1)