Grounding/Double Insulation Instructions; Servicing Of Double-Insulated Appliances; Service Information - Nilfisk CV 10 Instrucciones De Uso

1.1 Grounding / Double insulation instructions
Grounding instructions
Applicable to machines with a three pin plug.
This appliance must be grounded. If it should malfunction or
breakdown, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock. This appli-
ance is equipped with a cord having an equipment-grounding
conductor and grounding plug. The plug must be plugged into
an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
DANGER!
Improper connection of an equipment-grounding conductor
can result in risk of electric shock. Check with qualifi ed elec-
trician or service person if you are in doubt as to whether the
outlet is properly grounded, Do not modify the plug provided
with the appliance. If it will not fi t the outlet, have proper outlet
installed by a qualifi ed technician.
This appliance is for use on a nominal 120 volt circuit and has
a grounding plug that looks like the plug illustrated in Figure A.
A temporary adaptor which looks like the adaptor illustrated
in Figure B may be used to connect this plug to a two-pole
receptacle, as shown, if a properly grounded outlet is not
available. The temporary adaptor should be used only until
a properly grounded outlet, Figure A, can be installed by a
qualifi ed electrician. The green colored rigid ear, lug, or the
like extending from the adaptor must be connected to a per-
manent ground such as a properly grounded outlet box cover.
Whenever the adaptor is used, it must be held in place by a
metal screw.
NOTE! This temporary adaptor is not permitted in
Canada.
FIGURE A
Grounding blade is the longest of the 3
blades
All manuals and user guides at all-guides.com
Grounded outlet box

Servicing of double-insulated appliances

Applicable to machines with a two-pin plug
In a double-insulated appliance, two systems of insulation
are provided instead of grounding. No grounding means is
provided on a double-insulated appliance, nor should a mean
for grounding be added to the appliance. Servicing a double-
insulated appliance requires extreme care and knowledge of
the system, and should be done only by qualifi ed service per-
sonnel. Replacement parts for a double-insulated appliance
must be identical to the parts they replace.
A double insulated appliance is marked with the words
"DOUBLE INSULATION" or "DOUBLE INSULATED."
The symbol (square within a square)
may also be used on the product.

SERVICE INFORMATION

To obtain consistent performance over the life of your
vacuum, read through these instructions and keep them
handy for future reference. If you require service, contact the
dealer from whom the vacuum was purchased, or the local
authorized Service Station. Always refer to your Service Sta-
tion for complete service information, For prompt and com-
plete service information, always refer to the model, type and
serial number indicated on the rating plate.
FIGURE B
Adaptor
Metal
screw
Groundning tab
Grounded
outlet box
5