If the quality of the display diminishes, replace the battery with a
All manuals and user guides at all-guides.com
new CR-2032, 3V lithium battery (button cell).
1. Open the cover to the battery compartment 5 with a small
cross slot screwdriver and remove.
2. Turn the battery compartment downwards.
3. Gently hit the handle into the palm of your hand.
The battery will fall out of the compartment.
4. Insert the new battery. Make sure that the polarity is correct –
the positive pole (+) should be pointing towards the cover.
5. First put the cover 5 back on with the hinge pin, push to close
and screw back on tightly.
Cleaning and care
Attention! Do not use any aggressive, scouring or corrosive
cleaning agents! Keep moisture from getting into the computer
or the keys! Clean the jump rope with a soft cloth, dampened if
necessary.
disposal
Please dispose of packaging and article in an
environmentally friendly and correct manner!
Do not dispose of this article in standard household waste.
Use the services of a waste disposal company
or your local government waste disposal service. Dispose
of this article in accordance with local regulations.
dispose of Batteries Carefully
Batteries must not be disposed of along with normal
domestic waste! Return batteries to recycling facilities or
the dealer who sold them. Batteries are marked with
a dustbin with a red cross through it and chemical
pollutant symbols „Cd" for cadmium, „Hg" for mercury
and „Pb" for lead. Contact your local authority for further
information if in doubt.
26