HP Color LaserJet ProM452nw Guía De Inicio página 3

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

8.
Set up HP ePrint via email (optional)
Use HP ePrint via email to print documents by sending them as an email attachment to the printer's email address from any email-enabled device, even from devices that are not
on the same network.
To use HP ePrint via email, the printer must meet these requirements:
The printer must be connected to a wired or wireless network and have
Internet access.
HP Web Services must be enabled on the printer, and the printer must be
registered with HP Connected.
Enable HP Web Services
NOTE: Before enabling HP Web Services, verify that the printer is connected to a
network.
1.
Press the OK button.
2.
Open the HP Web Services menu.
3.
Select Print Information Sheet. The printer will print the page.
Troubleshooting
User guide
The user guide includes printer usage and troubleshooting information. It is
available on the printer CD and on the Web:
1.
Go to www.hp.com/support/colorljM452.
2.
Click Manuals.
For Windows, the user guide is copied to the computer during the recommended
software installation.
Windows
XP, Windows Vista
, and Windows
®
®
Click Start, select Programs or All Programs, select HP, select the folder for
the HP printer, and then select Help.
Windows
8:
®
On the Start screen, right-click an empty area on the screen, click All Apps on
the app bar, click the icon with the printer's name, and then select Help.
Check for firmware updates
1.
On the model control panel, press the OK button.
2.
Open the Service menu.
3.
Select LaserJet Update.
4.
Select Check for Updates Now.
Wired (Ethernet) network connection
Verify that the printer is attached to the correct network port using a cable of
the correct length.
Verify that the lights next to the network port are lit.
Verify that the print driver is installed on the computer.
Test the network connection by pinging the printer:
Windows: Click Start > Run. Type cmd, and press E
a space, type the printer IP address, and then press E
address: 192.168.0.1
OS X: Open the Network Utility, and type the IP address in the ping pane.
Press E
. Example IP address: 192.168.0.1
ntEr
If the window displays round-trip times, the network is working.
If the ping does not work, try restarting the printer and recheck all of the
connection steps.
All manuals and user guides at all-guides.com
7:
®
. Type ping, type
ntEr
. Example IP
ntEr
4.
Open the HP Embedded Web Server. Go to a network-connected computer, open
a browser window, and type the IP address shown on the information sheet in the
address box, and then press E
NOTE: The HP EWS provides access to many other advanced printer settings
as well.
5.
In the HP Embedded Web Server, click the HP Web Services tab.
6.
Click the Enable button.
The printer enables Web Services. The information page contains a printer code
necessary to register the HP printer at HP Connected.
7.
Go to
www.hpconnected.com
setup process.
Additional support resources
For HP's all-inclusive help for the printer, go to
www.hp.com/support/colorljM452:
Solve problems
Find advanced configuration instructions
Download software updates
Join support forums
Find warranty and regulatory information
Access mobile printing resources
Wireless network connection (nw models only)
Verify that the network cable is not connected. The printer cannot connect to
a wireless network when a network cable is connected.
Verify that the printer and wireless router are turned on and have power. Also
make sure the wireless switch is turned on.
Verify that the printer is within the range of the wireless network. For most
networks, the printer must be within 30 m (100 ft) of the wireless access
point (wireless router).
Verify that the print driver is installed on the computer.
Verify that the computer and printer connect to the same wireless
network.
For Mac, verify that the wireless router supports Bonjour.
Restart the wireless router.
Perform the wireless diagnostic test
1.
On the control panel, press the OK button.
2.
Select Self Diagnostics, and then select Run Wireless Test.
3
.
ntEr
to create an HP ePrint account and complete the

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Color laserjet prom452dn

Tabla de contenido