Environmental Protection; Declaration Of Conformity - Worx WG210E Manual De Instrucciones

ENVIRONMENTAL
PROTECTION
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority or retailer
for recycling advice.
PLUG REPLACEMENT(UK &
IRELAND ONLY)
If you need to replace the fitted plug then
follow the instructions below.
IMPORTANT
The wires in the mains lead are colored in
accordance with the following code:
Blue = Neutral
Brown = Live
As the colors of the wires in the mains lead of
this appliance may not correspond with the
coloured markings identifying the terminals
in your plug, proceed as follows. The wire
12 12
which is coloured blue must be connected to
the terminal which is marked with N. The wire
which is coloured brown must be connected
to the terminal which is marked with L.
WARNING! Never connect live or
neutral wires to the earth terminal of the
plug. Only fit an approved BS1363/A plug and
the correct rated fuse.
NOTE: If a moulded plug is fitted and has to
be removed take great care in disposing of the
plug and severed cable, it must be destroyed
to prevent engaging into a socket.
hedge trimmer
All manuals and user guides at all-guides.com
DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
Declare that the product
WORX hedge Trimmer
Description
WG209E WG210E
Type
(2-designation of machinery,
representative of hedge Trimmer)
Function trimming hedges and brushes
Complies with the following directives,
Machinery directive 2006/42/Ec
Electromagnetic compatibility directive
2004/108/Ec
RoHS directive 2011/65/EU
Noise emission in the environment by
equipment for use outdoors directive
2000/14/Ec amended by 2005/88/Ec
- Conformity assessment procedure as per
Annex V
- Measured sound power level 97 dB
- Declared guaranteed sound power level
100 dB
- The notified body involved
Name: Intertek Testing & certification Ltd
Address: Davy Avenue, Knowlhill, Milton
Keynes, MK5 8NL
Standards conform to,
EN 60745-1 EN 60745-2-15
EN ISO 3744 EN 55014-1
EN 55014-2 EN 61000-3-2
EN 61000-3-3
The person authorized to compile the
technical file,
Name Russell Nicholson
Address Positec Power Tools (Europe)
Ltd, PO Box 152, Leeds, LS10 9DS, UK
2012/11/26
Leo Yue
POSITEC Quality Manager
EN