Troubleshooting - Belkin F5D5131ea16 Manual Del Usuario

All manuals and user guides at all-guides.com

Troubleshooting

Diagnosing Switch Indicators
Symptom
Power LED does not light after power on.
Probable Causes
DC power adapter may be defective.
Possible Solutions
• Check for loose connections.
• Check the power outlet by using it for another device.
• Replace the DC power adapter.
Symptom
Port (Link/Act) LED does not light after connection is made.
Probable Causes
Switch port, network card, or cable may be defective.
Possible Solutions
• Check that the Switch and attached device are both
powered on.
• Be sure the network cable is connected to both devices.
• Verify that Category 5 or better cable is used for 10/100Mbps
connections, and that the length of any cable does not exceed
328 feet (100m).
• Check the network card and cable connections for defects.
• Replace the defective card or cable if necessary.
12 12