Descargar Imprimir esta página

Hansgrohe Picta 31410 Guia De Inicio Rapido página 7

Publicidad

Assembly
1 Flush through the supply pipes.
2 Mount the S - unions and align them.
3 Fasten the mixer with the washers.
Large differences in pressure between the hot and cold water supply should be balanced.
Operation
The mixer is actuated by lifting the lever head.
Swivel to the left = hot water, swivel to the right = cold water.
31410: The flow is changed from bath to shower function by pulling the knop at the upper side of the
spout. After shutting off the water flow, the mixer returns automatically to the bath function.
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
Hot water temperature:
Recommended hot water temperature:
Centre distance:
Connections:
Rate of flow:
To adjust the hot water limiter on single lever mixers, please see page 2.
No adjustment is necessary when using a continuous flow water heater.
Hansgrohe single lever mixers can be used together with hydraulically and thermically controlled con-
tinuous flow heaters if the flow pressure is at least 1.5 bars.
Spare parts
1
handle
1.1 screw cover
2
flange
3
nut
4
service set
5
seals (5)
6
mixer ball
7
cartridge cpl.
8
escutcheon
6
GB
max. 80° C
65° C
150 ± 16 mm
94130
94106
13952
13962
13964
14096
94135
max. 10 bars
1 - 5 bars
16 bars
cold right - hot left ½"
approx. 22 l/min. 3 bares
9 S - unions
10 mousseur cpl.
11 selector
12 diverter knob
13 non return valve
94140
13485
94103
94102

Publicidad

loading

Este manual también es adecuado para:

Picta 31610