ASROCK E350M1/USB3 Manual Del Usuario página 11

All manuals and user guides at all-guides.com
2.3 Installation of Memory Modules (DIMM)
E350M1/USB3 motherboard provides two 240-pin DDR3 (Double Data Rate 3)
DIMM slots.
It is not allowed to install a DDR or DDR2 memory module into DDR3
slot; otherwise, this motherboard and DIMM may be damaged.
Installing a DIMM
Please make sure to disconnect power supply before adding or
removing DIMMs or the system components.
Step 1. Unlock a DIMM slot by pressing the retaining clips outward.
Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the
break on the slot.
The DIMM only fi ts in one correct orientation. It will cause permanent
damage to the motherboard and the DIMM if you force the DIMM into
the slot at incorrect orientation.
Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends
fully snap back in place and the DIMM is properly seated.
ASRock E350M1/USB3 Motherboard
notch
break
notch
break
11