Opening The Pedestrian Door - Urmet IPerCom VOG 5 Manual Del Usuario

OPENING THE PEDESTRIAN DOOR

ATTENTION! To use the following gesture command, the pedestrian door must be in the systemis not configured
in "Under secret" mode.
The pedestrian door can be opened in the following 2 modes:
1. In stand-by
• Switch on the display (see gesture command
• Finally, perform 2 movements with the display on
<1 s
1
BEEP
2. During audio operation
• Perform 1 movement during a video door phone conversation with a calling station.
<1 s
1
BEEP
DS1761-025
SWITCHING ON THE
<2 s
<1 s
2
BEEP
2
BEEP
BEEP
DISPLAY)
3
BEEP BEEP
BEEP BEEP
3
4
13