Gude GAK 1001 B Traducción Del Manual De Instrucciones Original página 34

ENGLISH
30
CE marking
Protect against humidity
This side up
Safety instructions for Power chain
pruning saw
Do not use the appliance if you are tired, ill, under
influence of drugs, alcohol drinks or medicaments.
Keep children and other persons including ani-
mals in a safe distance when using the appliance.
Minimum safe distance is 10 m.
Poor lighting/light conditions represent a high sa-
fety risk. Provide adequate lighting or good lighting
conditions when working with the machine.
Keep all parts of your body in safe distance from
the saw when running. Before starting the saw,
make sure the saw chain does not touch anything.
A moment of inattention when working with the
chainsaw is able to cause the saw chain to catch your
clothes or parts of your body.
Hold the device firmly with two hands and away from
your body.
Wear protective glasses and ear protectors.
Further, wearing head, hand and leg protection
equipment is recommended. Suitable protective
clothing minimises the risk of injury by thrown-away
wood chips and possible contact with the saw chain.
Wear suitable protective clothing such as sturdy
shoes with non-slip sole, robust long trousers, gloves,
safety glasses and hearing protection!
Do not wear loose clothing or jewels. Hear, clothing
and gloves must be out of reach of moving parts
as they could get caught by the rotating parts. Do
not use the appliance when barefooted or in open
sandals.
Provide safe posture at all times and use the
chainsaw only when standing on a solid, safe and
level surface. A slippery or unstable surface, such as
ladder, may lead to loss of balance or loss of control over
the chainsaw.
Do not work on trees with the chainsaw. There is a
risk of injury when working on a tree.
Be careful when going backwards – risk of tripping!
Immediately remove cut branches/knots from the
work area to prevent injuries. Watch out for falling
branches!
As soon as a branch being cut off starts cracking and
falling down, move to the side immediately and keep
safe distance from the falling wood as it can hurl back
up and cause injuries.
When cutting a tense branch, be sure to know
that the branch will bounce back. If tension in the
wood fibres gets released, the tense branch may hit
the operator and/or cause a loss of control over the
chainsaw.
Be especially careful when cutting scrubs and
saplings. Thin material may get caught in the chainsaw
and hit you or you may lose your balance.
Carry the chainsaw by the front handle in a
switched-off condition and the saw chain must be
deflected from your body. Fit a protection cover
on the chainsaw whenever it is transported or sto-
red. Careful chainsaw treatment reduces the likelihood
of an accidental contact with the running saw chain.
Take care to prevent from fuel and oil leakage during
transport.
When being blocked, turn the appliance immediately
off and remove the jammed item.
The ON/OFF switch and safety switch must not be
locked.
Machine to be stored in a dry place.
Before using, check the tightness and proper
seating of all screwed and socket joints and
protective equipment and if all moving parts are
moving smoothly.
It is strictly prohibited to demount, adjust and
alienate the protective equipment on the
machine or put other protective equipment on
the machine.
Do not use the appliance if damaged or the
safety equipment is defective. Replace any worn
and damaged parts.