Black and Decker PW1300 Manual Del Usuario página 14

1
English
- when the gun trigger is released the dynamic pressure automatically cuts out the motor (see fig.4);
- when the gun trigger is depressed the automatic drop in pressure starts the motor and the pressure
is restored after a very slight delay;
EN
- if the tss is to function correctly all gun releasing and depressing operations must be performed at
intervals of less than 4-5 seconds.
To prevent damage to the appliance, when running do not stop the water jet for more than 10 minutes at a time.
7.3 Stopping the appliance
1) set the starter device switch on (oFF/0).
2) Depress the gun trigger and discharge the residual pressure inside the hoses.
3) engage the gun safety catch (D).
DECLARATION OF CONFORMITY
We declare under our sole responsibility that this
product is in conformity with the following
standards or standardized documents
EN 60335-2-79; EN 55014-1; EN 55014-2; EN 61000-3-2;
EN 61000-3-3; EN 61000-3-11; EN 60704-1
In accordance with the regulations:
98/37/EC
73/23/EEC, 89/336/EEC, 2000/14/EC
Date: 30/10/2006
MOdENA (I)
stefano reverberi
Managing Director
EN