Introduction; Odp Flasher Software; Control Panel Update Procedure; Composition Of The Package - De Dietrich AD264 Manual Del Usuario

1 Introduction

1.1 ODP Flasher Software

ODP Flasher software is available on the De Dietrich Internet site at
the following address
diematic/setup.exe.
This software is used to perform the following operations:
- To download the latest versions of the control panel programmes
from the Internet.
- To transfer the programmes from the PC control panel to the
programming tool.

1.2 Control panel update procedure

The control panel is updated in 3 steps:
1. Using ODP Flasher software, download the latest version of the
control panel programme to the PC.
2. Using ODP Flasher software, copy the new version of the control
panel programme from the PC to the programming tool.
3. Load the new version of the programme into the control panel
from the programming tool.

1.3 Composition of the package

- Programming tool
- USB cable (1 m)
- Connection cable 14 pts (300 mm)
09/12/2014 - 300011650-02
http://download.dedietrich-thermique.fr/
Once installed, ODP Flasher software can be accessed via the Start
menu in Windows.
Programming tool
3