3.5 Configuring the communications port
Check that the programming tool is connected to the PC.
To access the configuration procedure for the communications
port, select Preferences then Communication.
1
Select Auto Detect to locate the communications port to which
the programming tool is connected.
Once the programming tool has been detected, select "OK" to
confirm your choice.
2
10
If the programming tool is not connected or the
communications port is not configured, the message Tool
not detected is displayed in the information zone.
The communication port where the programming tool is plugged
is automatically selected.
C002779-04-C
3
C002780-04-B
Programming tool
4
C002781-04-B
09/12/2014 - 300011650-02