Care And Maintenance; Instructions For Recycling - Boeco BBL Serie Manual De Instrucciones

Care and Maintenance

Repairs
Repair work must be performed by trained service
technicians. Any attempt by untrained persons to perform
repairs may lead to hazards for the user.
Cleaning
! Disconnect the balance from the AC adapter and unplug
any data cables that are connected to the balance
!
Make sure that no liquid enters the balance housing
! Do not use any aggressive cleaning agents
(solvents or similar agents)
§ Clean the balance using a piece of cloth which has been
wet with a mild detergent (soap)
§ After cleaning, wipe down the balance with a soft,
dry cloth
Removing and Cleaning the
Weighing Pan:
§ Lift up and remove the
Safety Inspection
If there is any indication that safe operation of the balance
with the AC adapter is no longer warranted:
§ Turn off the power and disconnect the equipment
from AC power immediately
> Lock the equipment in a secure place to ensure
that it cannot be used for the time being
Safe operation of the balance with the AC adapter is no
longer ensured when:
– there is visible damage to the AC adapter
– the AC adapter no longer functions properly
– The AC adapter has been stored for a relatively long
period under unfavorable conditions
In this case, notify your nearest Service Center or the
International Technical Support Unit. Maintenance and repair
work may only be performed by service technicians who are
authorized by BOECO and who
– have access to the required maintenance manuals
– have attended the relevant service training courses
All manuals and user guides at all-guides.com
weighing pan together with
the pan support by gripping
them from under the shield
ring. Make sure that you
do not damage the weighing
system in doing so.

Instructions for Recycling

the Packaging
To ensure safe shipment, your balance has been packaged
using environmentally friendly materials. After successful
installation of the balance, you should return this packaging
for recycling.
For information on recycling options, including recycling
of old weighing equipment, contact your municipal waste
disposal center or local recycling depot.
11