Configuration; Setting The Parameters (Menu Codes); Balance Operating Menu (Overview) - Boeco BBL Serie Manual De Instrucciones

Configuration

Setting the Parameters (Menu Codes)

You can configure your BBL balance to meet individual
requirements by selecting from the parameters available
in the menu.
Example: Adapt the balance to unstable ambient
1 1 4
conditions: Menu code
Step Key (or instruction) Display
1. Turn off the balance [ON/OFF]
2. Turn the balance back on [ON/OFF]
t briefly
while all segments
are displayed
$ To navigate within a menu t
level; the last menu repeatedly
option is followed by the
first option
3. Select the 2nd menu level [PRINT]
4. Select the 3rd menu level [PRINT]
t
5. In Menu Level 3:
Select the desired option repeatedly
6. Confirm new setting; the
"o" indicates the currently
set option [PRINT] for 2 sec.
$ Select the next menu level
(here: move from the 3rd to
the 1st level) [PRINT]
$ Set other menu codes, [PRINT], t
if desired
t
7. Store parameter settings
and exit operating menu for 2 sec.
or
$ Exit operating menu without
storing changes [ON/OFF]
> Restart the application
All manuals and user guides at all-guides.com
1.
2.
...
9.
1.
1. 1.
1. 1. 2 o
1. 1. 4
1. 1. 4
o
1.
0.0
g

Balance Operating Menu (Overview)

o Factory setting
√ User setting
Menu 1. Balance 1.1. Adapt filter
functions
1.3. Stability range
1.4. Weight unit
for calibration
weight
1.6. Auto zero
1.7. Weight unit 1
2. Application 2.1. Program
programs selection
3. Application 3.1. Weight unit 2
3.3. Reference qty
or %
5. through 7. applies only if an interface is installed;
see the corresponding instructions
8. Extra 8.1. Menu
functions
8.2. External
switch function
8.3. Power-on
mode
9. Reset menu 9.– Factory
settings
* = not for models with a readability of 0.1 mg
1.1.1 Minimum vibration
1.1.2 o Normal vibration
1.1.3 Strong vibration
1.1.4 Extreme vibration
1.3.1 1/4 digit
1.3.2 1/2 digit
1.3.3 1 digit
1.3.4 o 2 digits
1.3.5 4 digits
1.4.1 o Grams
1.4.2 Kilograms*
1.4.3 Pounds
1.6.1 o On
1.6.2 Off
See "Toggle between
Weight Units"
see the desired application
program description
see "Toggle between
Weight Units"
see the desired application
program description
8.1.1 o Parameter settings
alterable
8.1.2 Parameter settings
read only
applies only if an interface
is installed; see the
corresponding instructions
8.3.1 Off/on (battery
shuts off
automatically after
3 min)
8.3.2 o Stand-by/on
9.– 1 Reset
9.– 2 o Do not reset
9